HONEYWELL SATRONIC TF832.3 OIL BURNER CONTROL – BRAND NEW

Free Royal mail postage

CONSTRUCTIONAL FEATURES The control box is enclosed in a protective, flame resistant, transparent, plug-in type plastic housing, and includes: – Synchronous motor with gearbox driving cam switch – Cam switch with informative, coloured programme indicator – 16-way cam switch assembly controlling the programme sequence – 2 DC relays and 1 remanence relay on common yoke – Plug-in printed circuit board with mains transformer, LED display and electronic components On the underside of the unit are robust plug terminals where the air proving switch and monitoring of the ignition spark can be programmed via two wire links which can be cut as required. The flame detector selection switch is also situated on the the underside of the unit.

TECHNICAL DATA Supply voltage 220 / 240 V (-15… +10%) 50 HZ (40 – 60 Hz) AC frequency variations result in proportional timing deviations Fuse rating 10 A rapid, 6 A slow Power consumption approx. 15 VA Max. current per output terminal 4 A Total 6 A Sensitivity Ionisation input 1.6 µA UV input 70 µA Min. sensor current Ionisation/IR probe 5 µA = 2 LED UV tube 250 µA = 2 LED Air proving switch 6 A, 220 V Reset delay none Flame detector cable Ionisation 50 m normal cable 100 m screened cable UV tube 100 m normal cable 200 m screened cable UV tube UVZ 780 blue low sensitivity UVZ 780 white medium sensitivity UVZ 780 red high sensitivity Weight incl. base 1100 g Mounting attitude any Insulation standard IP 44 Permissable ambient temp. -20° C to +60° C incl

Important Information.

This item requires a good degree of technical experience to fit as it is prone to failure if installed in the wrong boiler with contrary voltage. Please ensure your boiler is compatible before purchasing. Please ensure it is installed by an experienced & certified Gas engineer or electrician.

If this is fitted and damaged through customer’s negligence, No refund will be issued

For the records, we retain digital records of all items sold across our digital platforms; Actual pictures, serial, bios, part numbers, and warranty details.

ALL SUSPECTED FAULTY ELECTRICAL ITEMS WILL BE SUBJECT TO SUPPLIERS TESTING PRIOR TO CREDIT BEING ISSUED.  ANY  ITEMS FOUND ‘NOT TO BE FAULTY’ WILL BE RETURNED TO YOU AT YOUR COST/COLLECTION WITH A REPORT FROM MANUFACTURER. PROOF OF PURCHASE  AND DESCRIPTION OF FAULT IS REQUIRED PRIOR TO SENDING BACK, ‘FAULTY’ WOULD NOT BE ACCEPTABLE.